Three models are part of the MG3710A series, with frequency coverage
from 100 kHz to 2.7 GHz, 4 GHz, or 6 GHz, depending upon the instrument. The
MG3710A has two separate built-in RF outputs, each of which allows two
modulation schemes to be selected simultaneously, so up to four different RF
signals can be generated at one time. The result is that the MG3710A serves as
a test source that can produce multiple signals, replacing several expensive
signal generators. The ability of the MG3710A to cost-efficiently support
multiple RF signals makes it extremely well suited for testing MIMO, Carrier
Aggregation, as well as multi-system devices and systems.
The MG3710A has improved ACLR of -71 dBc, which allows tests to be made
closer to the device under test (DUT), for more stable measurements and
increased production yield. SSB phase noise performance has also been improved
to <-131 dBc/Hz (typical). The result is high-quality RF signal output,
making the MG3710A well suited for a range of wireless applications extending
from wideband mobile phone systems to narrowband communications systems, such
as automotive electronics, and digital public and industrial radio.
The MG3710A also has wide vector modulation bandwidth of 120 MHz that
can be extended to 160 MHz using an external IQ input, and absolute level
accuracy is +/-0.5 dB. High power output of +23 dBm reduces test cost by
eliminating the need for an external amplifier, while also reducing the risk of
damage to the DUT. Fast switching speed of <600 µs makes the MG3710A well
suited for production test environments. Further improving test times is the
large 4 GB memory per RF output, which allows multiple waveform data to be
loaded for reduced reload and measurement times.
Anritsu has pre-installed waveform patterns of all major standards into
the MG3710A, making it easy for engineers of various experience to test LTE,
W-CDMA/HSPA, CDMA2000, GSM and PDC, as well as wireless LAN, Bluetooth®, and
ISDB-T. Furthermore, any pattern can be generated using Anritsu’s IQproducer
software to output new RF test signals.
About Anritsu
Anritsu Company is the American subsidiary of Anritsu Corporation, a
global provider of innovative communications test and measurement solutions for
more than 110 years. Anritsu provides solutions for existing and
next-generation wired and wireless communication systems and operators. Anritsu
products include wireless, optical, microwave/RF, and digital instruments as
well as operations support systems for R&D, manufacturing, installation,
and maintenance. Anritsu also provides precision microwave/RF components,
optical devices, and high-speed electrical devices for communication products
and systems. With offices throughout the world, Anritsu sells in over 90
countries with approximately 4,000 employees.